Spec Pak & Accessories
In Stock
390LPK-K Lanyard Parking Breakaway Attachment for fall protection harnesses. Hard Pull Snaps allow for the breakaway of a lanyard attached to the parking ring. Per ANSI Z359.11-2014 Parking attachment element having disengagement load of no more than 120 pounds (0.5 kN). Made with Kevlar Webbin..
$6.50
In Stock
SKU: 390LPK
390LPK-N Lanyard Parking Breakaway Attachment for fall protection harnesses. Hard Pull Snaps allow for the breakaway of a lanyard attached to the parking ring. Per ANSI Z359.11-2014 Parking attachment element having disengagement load of no more than 120 pounds (0.5 kN). Made with Nylon Webbing..
$3.50
In Stock
SKU: 901
Patient packaging and extrication system combine the backboard immobilization of a shortboard with the suspension and support of a full-body harness. The Spec Pak system utilizes an integrated polyethylene board along the back to reduce wear and create a smooth
sliding surface for confined space op..
$2,265.00
In Stock
SKU: 905Spreader
Spec Pak Spreader Bar was designed for Wind Turbine rescue techniques that require the horizontal transfer of a patient. Spreader Bar is connected to Chest D-rings on Spec Pak. This technique utilizes two 4:1 Mini
Haul or AZTEC kits attached to the swivel on the spreader bar to move a
patient in H..
$330.00
In Stock
(Spec
Pak will not function in all lifting modes without the use of Lifting
Bridles). The use of Lifting bridle is recommended for use in most
lifting operations. The upper D ring attachment should only be used for
short duration lifts 5-10 minutes. Standard Lifting Bridal System (905) is includ..
$348.00
In Stock
SKU: 905WT
New Spec Pak Spreader Bar was designed for Wind Turbine rescue techniques that require the horizontal transfer of a patient. Spreader Bar is connected to chest D-rings on Spec Pak. This technique utilizes two
4:1 Mini Haul or AZTEC kits attached to the swivel on the spreader bar to move a patient i..
$468.00
In Stock
SKU: Tool Teather
Unique tool tether with an integrated bungee cord. Retracted length 33
inches, full extension 58 inches. One end is designed with half twist to allow for girth hitching of tools. Strength 450lbf. 4kN(Static
Testing). WLL 10 lbs(Dynamic loading Per ANSI/ISEA 121-218 Test criteria)...
$9.00
In Stock
SKU: Tool TeatherCB
Unique tool tether with integrated bungee cord and attached 2 stage carabiner. Carabiner has a captive pin to keep it from coming off of the teather. Retracted length 36 inches, full extension 60 inches. One end is designed with half twist to allow for girth hitching of tools.
Strength 450lbf. 4kN(..
$21.00
In Stock
SKU: A213
Tool tether and accessory carabiner. Two stage autolock carabiner. Captive pin provided.SpecificationsA213 Tool Tether CarabinerCold Formed AluminiumMin tensile strength 1,800lbf. (8kN)Weight: 1.1oz (31.2gm)..
$11.00
Showing 1 to 9 of 9 (1 Pages)