Personal Retention Lanyards
SKU: 364NC
22-inch lanyard made of 7000 lbf. (31kN) nylon webbing. Designed to
girth hitch to the dorsal D ring of Yates Stabo or Extraction harness for
SPIE extraction operations. Carabiner not included. Made in the USA. Lanyard is available in Black, Terra, Foliage Green Colors...
$31.90
SKU: 364NFPA
22-inch lanyard made of 7000 lbf. (31kN) nylon webbing. Designed to
girth hitch to the dorsal D ring of Yates Stabo or Extraction harness for
SPIE extraction operations. Hot forged Captive Eye DMM Tactical OvaLock 3
Stage aluminum carabiner with new ANSI Z359.1-06 certified gate(3600
lbf, 16KN s..
$94.00
390LPK-K Lanyard Parking Breakaway Attachment for fall protection harnesses. Hard Pull Snaps allow for the breakaway of a lanyard attached to the parking ring. Per ANSI Z359.11-2014 Parking attachment element having disengagement load of no more than 120 pounds (0.5 kN). Made with Kevlar Webbin..
$6.50
SKU: 390LPK
390LPK-N Lanyard Parking Breakaway Attachment for fall protection harnesses. Hard Pull Snaps allow for the breakaway of a lanyard attached to the parking ring. Per ANSI Z359.11-2014 Parking attachment element having disengagement load of no more than 120 pounds (0.5 kN). Made with Nylon Webbing..
$3.50
SKU: 544
Super lightweight short daisy chain designed to allow you to extend your rappel device further away from your body to allow safer egress over edges such as window frames. Daisy Link is made of .75 inch technora webbing which is extremely cut resistant. Individual clip-in
pockets are reinforced to y..
$27.50
SKU: 563
Designed using the first all-black, nonreflective, oxide plated quick-release shackle (4840 lbf mbs) made of stainless steel by Ronstan. Swedged release pin (New SOCOM requirement) eliminates plunger pin from releasing in the event the retaining ring is broken. Retaining the split ring is safety TIG..
$98.50
SKU: 563-6300
Designed using the first all-black, nonreflective, oxide plated quick-release shackle made of stainless steel by Ronstan. Release mechanism has a unique pinned swivel to allow easier release at various release tab pull angles. The extra heavy-duty snap shackle has large
diameter plunger which allow..
$163.75
SKU: 563DAISY
Designed using the first all-black, nonreflective, oxide plated quick-release shackle made of stainless steel by Ronstan. Swedged release pin (New SOCOM requirement) eliminates plunger pin from releasing in the event the retaining ring is broken. Retaining the split
ring is safety TIG welded. Heavy..
$98.00
SKU: 565
For use as a personal retention lanyard in a helicopter. Designed using the first all-black, nonreflective, oxide plated quick-release
shackle made of stainless steel by Ronstan. Oversize quick release shackle allows the user to easily release from harness or belt in the event of an unplanned landi..
$138.00
SKU: 565FROG
For use as a personal retention lanyard in a helicopter. Unique Kong
FROG 360 now with built in swivel, quick-release mechanism on one end (Strength 23kN) is designed to hook directly into helicopter floor rings. Built with NEW Custom made 5000lb. mil-spec 5625 tubular webbing weave pattern b..
$114.00
SKU: 566
For use as a personal retention and extraction lanyard. Designed to girth hitch to users harness and connect to extraction point via unique aluminum snap hook. Built with NEW Custom made 5000lb. mil-spec 5625 tubular webbing weave pattern but wider( 1 1/8"
width). New webbing has better cut re..
$69.00
SKU: 566-DMM
For use as a personal retention and extraction lanyard. Designed to
girth hitch to users harness and connect to extraction point via unique
New DMM captive Eye Carabiner. Built with mil-spec 4000 lbf (18 kN) 5625
tubular webbing. Lanyard rated strength 3400 lbf. (15kN). High strength hot-forged a..
$69.00
SKU: 567 CEC
For use as a personal retention and extraction lanyard. Designed to attach to users' harness and connect to extraction point or Helo hard point via unique New Aluminum Yates captive Eye Carabiner. Built with mil-spec 4000
lbf (18 kN) 5625 tubular webbing. Built with NEW Custom made 5000lb. mil-spec..
$125.50
SKU: 567
For use as a personal retention and extraction lanyard. Designed to connect to users' harness and to fixed surface or extraction point via unique aluminum snap hook. Built with NEW Custom made 5000lb. mil-spec 5625 tubular webbing( 1 1/8"
width). New webbing has better cut resistance than stan..
$115.50
SKU: 568
For use as a personal retention lanyard in a helicopter. Helo
Personal Retention Lanyard without retraction bungee inserted in webbing. Designed using the first all-black, nonreflective, oxide plated quick-release shackle made of stainless steel by Ronstan.
Oversize quick release shackle allows th..
$118.00
SKU: 569
For use as a personal retention lanyard in a helicopter. Designed using the first all-black, nonreflective, oxide plated quick-release
shackle made of stainless steel by Ronstan. Oversize quick release shackle allows the user to easily release from harness or belt in the event of an unplanned landi..
$166.00
SKU: 569-6300
For use as a personal retention lanyard in a helicopter. Heavy-duty
the snap shackle has a large diameter plunger which allows for much easier release while under full 300 lb load. Designed using the first all-black, nonreflective, oxide plated quick-release shackle made of stainless steel by Ronst..
$237.00
SKU: 571-DMM
For use as an adjustable length personal retention lanyard for Rappel
Masters, Crew Chiefs and Riggers. Designed to connect to users harness
and to fixed surface or helo rappel point via unique New DMM captive Eye
Carabiner. Built with mil-spec 4000 lbf (18 kN) 5625 tubular webbing.
Lanyard rate..
$211.00
SKU: 571
For use as an adjustable length personal retention lanyard for Rappel
Masters, Crew Chiefs and Riggers. Designed to connect to users' harness and to fixed surface or helo rappel point via unique aluminum snap hook. The lanyard has an adjustable length using Yates adjustable daisy chain system. The ..
$188.00
"NEW" For use as an adjustable length personal retention lanyard for Rappel
Masters, Crew Chiefs and Riggers. Designed to connect to users' harness and to fixed surface or helo rappel point via unique aluminum snap hook. The lanyard has an adjustable length using Yates adjustable daisy chain system..
$206.00
SKU: 572
For use as a personal retention lanyard in a helicopter.Unique Kong
FROG 360 now with built in swivel, quick-release mechanism on one end
(Strength 23kN) is designed to hook directly into helicopter floor
rings. Built with NEW Custom made 5000lb. mil-spec 5625 tubular webbing
weave pattern..
$94.00
SKU: 572
572DL Quick Disconnect FROG Canine Leash. FROG Canine leash is rated fully structural and can also be used as a canine retention lanyard in a
helicopter. Unique Kong Frog quick-release mechanism on one end
(Strength 22kN) The hand loop on the leash has a section of 11mm person climbing rope i..
$105.00
SKU: 572DL-L
572DL-L Quick Disconnect FROG Canine Leash (Long Version). FROG The canine leash is rated fully structural and can also be used as a canine retention lanyard in a helicopter. Unique Kong Frog quick-release
the mechanism on one end (Strength 22kN) The hand loops on the leash have a
section of ..
$110.00
SKU: 576T/576B
Designed in conjunction with US SOCOM. For use as an adjustable length personal retention lanyard for Rappel
Masters, Crew Chiefs and Riggers. Designed to connect to users' harness and to fixed surface or helo rappel point via unique aluminum snap hook or Ronstan 6200 quick release. Oversize quick ..
$187.00
SKU: Tool Teather
Unique tool tether with an integrated bungee cord. Retracted length 33
inches, full extension 58 inches. One end is designed with half twist to allow for girth hitching of tools. Strength 450lbf. 4kN(Static
Testing). WLL 10 lbs(Dynamic loading Per ANSI/ISEA 121-218 Test criteria)...
$9.00
SKU: Tool TeatherCB
Unique tool tether with integrated bungee cord and attached 2 stage carabiner. Carabiner has a captive pin to keep it from coming off of the teather. Retracted length 36 inches, full extension 60 inches. One end is designed with half twist to allow for girth hitching of tools.
Strength 450lbf. 4kN(..
$21.00
SKU: L44IHE
HELO ADJUSTThe HELO ADJUST is a restraint device intended to limit passenger movement while traveling inside of helicopters when seatbelts or other restraint systems are not available or being used. Designed for Military use only.The
HELO ADJUST restraint device provides one-hand adjustability..
$199.95
SKU: A213
Tool tether and accessory carabiner. Two stage autolock carabiner. Captive pin provided.SpecificationsA213 Tool Tether CarabinerCold Formed AluminiumMin tensile strength 1,800lbf. (8kN)Weight: 1.1oz (31.2gm)..
$11.00
Showing 1 to 28 of 28 (1 Pages)