Welding & Cutting at Height
MADE IN USA
Model: 1423 ArmorTech - 7/16 inch
A new concept in rope, designed for high heat situations such as welding and electrical transmission arc flash situations. The unique design of BlueWater’s ArmorTech rope also gives it excellent cut resistant properties, advantageous in rock scaling and construction applications. ArmorTech™ rope has..
$2.63
Model: 1427 ArmorTech - 10.5 mm
A new concept in rope, designed for high heat situations such as welding and electrical transmission arc flash situations. The unique design of BlueWater’s ArmorTech rope also gives it excellent cut resistant properties, advantageous in rock scaling and construction applications. ArmorTech™ rope has..
$2.32
Brand: Yates Gear
Model: 3-12 ft. x 12mm ArmorTech™ Rope Anchor Sling (Arc-Flash rated)
3-8 ft. x 12mm Dry-coating ArmorTech™ Rope Anchor Sling (Arc-Flash rated)Made of heavy
duty 12mm diameter ArmorTech rope with sewn eye termination ends and
Teflon "Dry" Coating. This is a DOUBLE SHEATH rope design. Loop ends allow the rope sling to be wrapped
single, double, triple or end to e..
$32.45
Brand: Yates Gear
Model: 390KA Kevlar® Rope Access Welding Harness
Yates
has designed the 390KA harness to meet the needs of the rope access
worker who specifically needs a harness for welding, torch cutting, and
heavy grinding applications. The 390KA harness has a more flexible waist
pad system than the 390KC Harness. Designed similar to 390FRA harness
b..
$1,106.00
Brand: Yates Gear
Model: 390LPK-K Lanyard Parking Breakaway Attachment. (Kevlar Webbing)
390LPK-K Lanyard Parking Breakaway Attachment for fall protection harnesses. Hard Pull Snaps allow for the breakaway of a lanyard attached to the parking ring. Per ANSI Z359.11-2014 Parking attachment element having disengagement load of no more than 120 pounds (0.5 kN). Made with Kevlar Webbin..
$6.50
Brand: Yates Gear
Model: 390LPK-N Lanyard Parking Breakaway Attachment. (Nylon Webbing)
390LPK-N Lanyard Parking Breakaway Attachment for fall protection harnesses. Hard Pull Snaps allow for the breakaway of a lanyard attached to the parking ring. Per ANSI Z359.11-2014 Parking attachment element having disengagement load of no more than 120 pounds (0.5 kN). Made with Nylon Webbing..
$3.50
Brand: Yates Gear
Model: 556L Double Tool Holster "L"
Tool holster that fits 390 Harness, 387 and 380R Harnesses, Double Holster will not fit on Size S and M harnesses. Designed to fit spanner and large crescent wrenches. Fits onto any webbing up to
1.75 inches. Hangs below belt to allow easy access to tools. Three
Sizes: Small (1"-1 1/4" open..
$36.00
Brand: Yates Gear
Model: 556R Double Tool Holster "R"
Tool holster that fits 390 Harness, 387 and 380R Harnesses. Double Holster will not fit on Size S and M harnesses. Designed to fit spanner and large crescent wrenches. Fits onto any webbing up to
1.75 inches. Hangs below belt to allow easy access to tools. Three
Sizes: Small (1"-1 1/4" open..
$36.00
Brand: Yates Gear
Model: 557L Large Tool Holster
Tool holster that fits 390 Harness, 387 and 380R Harnesses. Designed to fit spanner and large crescent wrenches. Fits onto any webbing up to
1.75 inches. Hangs below belt to allow easy access to tools. Three
Sizes: Small (1"-1 1/4" opening), Large (1 1/4" -1 3/4" opening)...
$22.00
Brand: Yates Gear
Model: 557S Small Tool Holster
Tool holster that fits 390 Harness, 387 and 380R Harnesses. Designed to fit spanner and large crescent wrenches. Fits onto any webbing up to
1.75 inches. Hangs below belt to allow easy access to tools. Three
Sizes: Small (1"-1 1/4" opening), Large (1 1/4" -1 3/4" opening)...
$22.00
Brand: Yates Gear
Model: 828 Kevlar Tower/Ladder Lanyard w/ Alum Hooks - 12 Ft. FF
Kevlar Tower/Ladder Lanyard is designed for high heat environments. Lanyard is sewn entirely of heat resistant Kevlar webbing and thread. The shock absorber portion of the lanyard is covered with CarbonX material for added protection. Allows the firefighter to attach themself to a bucket or la..
$280.00
Brand: Yates Gear
Model: 874 NEW FR 100% Tie Off & Tie-Back, 6 ft. w/6-12ft
The tear tape used in this Tie-Back Lanyards is quite unique. Great for welding applications. It passes both 6 ft Free Fall(Factor 1) and 12
Ft Free Fall(Factor 2) criteria. The 6/12 tear tapes start activation at 900 lbf. average activation, then half way threw the deployment distance it ram..
$445.00
Brand: PETZL
Model: BL071BA00 Petzl ASAP Lock® - ANSI
ASAP® LOCKMobile fall arrester with locking function The
ASAP LOCK mobile fall arrester is designed to facilitate handling
during rope ascents. In normal use, the device moves freely along the
rope without any manual intervention and follows the user in all his/her
movements. In case of..
$299.95
Brand: Yates Gear
Model: Tool Teather Bungee Tool Tether
Unique tool tether with an integrated bungee cord. Retracted length 33
inches, full extension 58 inches. One end is designed with half twist to allow for girth hitching of tools. Strength 450lbf. 4kN(Static
Testing). WLL 10 lbs(Dynamic loading Per ANSI/ISEA 121-218 Test criteria)...
$9.00
Brand: Yates Gear
Model: Tool TeatherCB Bungee Tool Tether - w/Carabiner
Unique tool tether with integrated bungee cord and attached 2 stage carabiner. Carabiner has a captive pin to keep it from coming off of the teather. Retracted length 36 inches, full extension 60 inches. One end is designed with half twist to allow for girth hitching of tools.
Strength 450lbf. 4kN..
$21.00
Brand: Yates Gear
Model: CAS-1 Chest Ascender Attachment Strap
Harness Chest Ascender attachment strap. Can be used on any Yates full body harness that utalizes Trapazoid attachment between seat and chest portion of the harness. (380, 380R, 387, 387P, 390, 390FRA/FRC, 384, 386 Harnesses)..
$3.95
Brand: Yates Gear
Model: DMMVT DMM Vault Tool Holder
DMM Vault Tool Holder that fits 390 Harness, 387 and 380 Harnesses.The Vault is a secure and durable tool holder that can be used on everything from harnesses and kit bags to vehicles.The two-part aluminum alloy Vault is secured using a stainless steel bolt
and is the ideal solution for ..
$69.95
Brand: Yates Gear
Model: ISCD5Y Descender/Belay Device
ISC D5Y Descender In stock now. The new D5Y was exclusively designed for Yates by ISC it is a double-stop
device. Wear parts approach the point of indestructibility. The handle is made of aluminum (as opposed to plastic), and is extremely durable. The
D5Y Descender allows for controll..
$299.95
Brand: PETZL
Model: L071CB00 Petzl Energy absorber for ASAP LOCK
The ASAP’SORBER AXESS energy absorber connects to the ASAP or ASAP
LOCK mobile fall arrester to allow the user to work at a distance from
the rope, in order to protect it during certain work phases. Equipped
with tear-webbing inside a pouch that opens on each end, the absorber is
protected f..
$55.95
Brand: PETZL
Model: L052BMD08 PETZL GRILLON BM'D Positioning Lanyard
L052BMD08 GRILLON BM'D Positioning LanyardAdjustable work positioning lanyard with HOOK connectorThe
GRILLON BM'D adjustable lanyard is used to make work positioning
systems, to complement a fall-arrest system. Its length can be very
easily and precisely adjusted as necessary for comfortable p..
$293.85
Brand: Yates Gear
Model: A213 Tool Tether Carabiner
Tool tether and accessory carabiner. Two stage autolock carabiner. Captive pin provided.SpecificationsA213 Tool Tether CarabinerCold Formed AluminiumMin tensile strength 1,800lbf. (8kN)Weight: 1.1oz (31.2gm)..
$11.00
Brand: Yates Gear
Model: ASAPFRASAP YATES ANSI FR Lanyard w/ PETZL ASAP Lock®
YATES ANSI FR Lanyard w/ PETZL ASAP Lock® is easiest back-up system
on the marked to use for vertical life line applications. Complaint with
the new ANSI Z359.15-2014 Standard. This self-trailing function is
important for transmission tower work climbing techniques especially
while down clim..
$506.95
Brand: Yates Gear
Model: Yates Positioning Lanyard(1.5 and 2 meter) w/RAD Adjuster
NEW Adjustable positioning lanyard with BlueWater ArmorTech™ Rope
Lanyard and ISC RAD Adjuster. Lanyard is made from 11.5mm BlueWater
ArmorTech™ Rope for increased durability over sharp edges. The outer
sheath of ArmorTech™ rope is 100% Technora™ which is extremely fire
resistant with a melt..
$353.00
Brand: Yates Gear
Model: RADLANYARD Yates Positioning Lanyard(6 & 8') w/RAD Adjuster
NEW Adjustable positioning lanyard with BlueWater ArmorTech™ Rope
Lanyard and ISC RAD Adjuster. Lanyard is made from 11.5mm BlueWater
ArmorTech™ Rope for increased durability over sharp edges. The outer
sheath of ArmorTech™ rope is 100% Technora™ which is extremely fire
resistant with a melt..
$352.00
Showing 1 to 24 of 24 (1 Pages)