Fire Rescue
SKU: 1018
Designed as a personal escape descender for firefighters in bailout situations. Works well on single and double ropes up to 7.5 mm, and can
be used on single ropes up to 12.5 mm. • CNC machined from 3/8 inch thick aircraft aluminum • Compact size and lightweight • The single or double wrap allows t..
$29.00
SKU: 1025
New style Figure 9 descender with attachment eye set 90 degrees to the
rest of the unit. The Figure 9 also has a top spike which easily allows
rope to be wrapped over the top for added friction and control of
heavier loads. Forged aluminum, hard coat anodized...
$41.80
Original design figure eight has many uses in work and rescue such as rappelling, belaying and lowering. Manufactured of forged alloy aluminum and hard coat anodized for extended wear. Rig point will allow
multiple carabiners to pass through the hole.Rope diameter range (mm) 9 - 13
..
$49.00
SKU: 1187
High strength "Hot" forged aluminum alloy carabiner. Designed for
Fire Rescue and Rigging use. This is the first ladder hook style
carabiner for fire service use that meets the stringent ANSI
Z359.12-2019 standard for connectors. "Ultra-Safe" three-stage autolocking gate mechanism allows for 3600..
$75.00
SKU: 1188
Allows the firefighter to attach themselves safely to a ladder rung or tower platform. Available in overall length of connections which measures 21 inches. NFPA limited overall length of lanyard from the surface of the belt or harness to the connection of the inside of the connection device to a max..
$188.00
SKU: 1785
Quick connect carabiner designed to replace the existing screw link connectors used on many full-body harnesses. Used to connect the seat
and chest portions of many Yates full-body harnesses such as the
Voyager, Voyager Riggers, and Rope Access. Stainless steel. Strength
26kN. • Meets ANSI/OSHA a..
$40.00
SKU: 1810
Revised 5th Edition by Tom PendleyThis updated field
guide covers Rope Rescue, Confined Space Rescue, Swift Water Rescue,
Trench Rescue, Structural Collapse and Helicopter Operations. Its
designed to compliment a full training course for easy reference of
important step by step procedures b..
$26.50
SKU: 2135
NFPA Certified Anchor Straps are made from 1 3/4" mil-spec webbing, and all of the hardware on the anchor straps meets NFPA and military specifications. Our anchor straps come in four different lengths and have a D ring at each end. When you create an attachment to the D rings instead of the webbing..
$62.00
SKU: 320A
Designed for the fire department, rescue, military, industrial and commercial applications where a Class II seat harness is required.
Quickly and easily donned and adjusted by the use of Camlock buckles. • 320 one size, fully adjustable, 1 lb. 9 oz. • 320A sizes S, M, L, XL, 2 lb. 8 oz. • Large D r..
$268.00
SKU: 320
Designed for the fire department, rescue, military, industrial and commercial applications where a Class II seat harness is required.
Quickly and easily donned and adjusted by the use of Camlock buckles. • 320 one size, fully adjustable, 1 lb. 9 oz. • 320A sizes S, M, L, XL, 2 lb. 8 oz. • Large D r..
$167.00
SKU: 321
A lightweight harness specially designed for victim rescue and ladder use.
Quick connect snap hook and D ring adjustment system allows for fast application. Waist pocket securely holds leg straps until needed and in victim use it enables the rescuer to apply belt to victim giving the rescuer a fast..
$220.00
SKU: 322
Five-inch wide laminated foam waist pad that retrofits onto any belt up to 2.5 inches wide. It provides greater comfort and support. Made with five attachment points for hanging gear. Reflective stripe increases
wearers visibility.Sizes S-L..
$47.00
SKU: 324A
It allows the firefighter to attach themselves safely to a ladder rung or tower platform. Available in overall length of connections which
measures 21 inches. NFPA limited the overall length of lanyard from the surface of the belt or harness to the connection of the inside of the connection device ..
$107.50
SKU: 324C
It allows the firefighter to attach themselves safely to a ladder rung or tower platform. Available in overall length of connections which
measures 21 inches. NFPA limited the overall length of lanyard from the surface of the belt or harness to the connection of the inside of the connection device ..
$154.50
SKU: 330
Designed for the fire department, rescue, military, industrial and
commercial applications where a rear fall arrest D attachment point is
not required. The seat portion is easily donned and adjusted by use of
camlock buckles. Chest portion includes front D ring for the high point of
attachment f..
$288.00
SKU: 330A
Designed for the fire department, rescue, military, industrial and
commercial applications where a rear fall arrest D attachment point is
not required. The seat portion is easily donned and adjusted by use of
camlock buckles. Chest portion includes front D ring for the high point of
attachment f..
$392.00
SKU: 368
Class I ladder/personal escape belt. Extra-large, double locking quick connects snap hook and large locking D ring adjustment system that is easy to use while wearing gloves. Constructed of two layers of Kevlar
webbing to increase stiffness when carrying tools. A pad under buckle for comfort. Two a..
$230.00
SKU: 369
Class I ladder/personal escape belt. Extra-large, double locking quick connects snap hook and large locking D ring adjustment system that is easy to use while wearing gloves. Constructed of two layers of nylon
webbing to increase stiffness when carrying tools. A pad under buckle for comfort. Two ad..
$150.00
SKU: 371K
Kevlar Class I personal escape belt. Utilizes double locking quick connect snap hook and locking D ring adjustment system. Constructed of two layers of 9000 lbf. Kevlar webbing (coated to reduce wear and abrasion) with an inner stiffening material to increase stiffness for carrying tools. A pad unde..
$219.00
SKU: 371N
Nylon Class I personal escape belt. Same construction and features of
the Kevlar Truck Escape Belt but manufactured in nylon webbing. Utilizes
double locking quick connect snap hook and locking D ring adjustment
system. Constructed of two layers of 9000 lbf. nylon webbing (coated to
reduce wear ..
$152.00
SKU: 371NXL
Nylon Class I personal escape belt. Same construction and features of
the Kevlar Truck Escape Belt but manufactured in nylon webbing. Utilizes
double locking quick connect snap hook and locking D ring adjustment
system. Constructed of two layers of 9000 lbf. nylon webbing (coated to
reduce wear ..
$156.00
SKU: 371 - XL
Kevlar Class I personal escape belt. Utilizes double locking quick connect snap hook and locking D ring adjustment system. Constructed of two layers of 9000 lbf. Kevlar webbing (coated to reduce wear and abrasion) with an inner stiffening material to increase stiffness for carrying tools. A pad unde..
$226.00
SKU: 845
4-10 ft. Super Duty Anchor Sling. Add versatility to any tactical, rescue or rigging system. Large D ring at ends of the strap allows the sling to be wrapped single, double, triple and rigged choker style depending on the particular situation. Manufactured from 2 inch super heavy duty webbing. D rin..
$75.70
SKU: 850
4-10 Foot SD Anchor Sling w/Wear Pad. Add versatility to any tactical, rescue or rigging system. Large D ring at ends of the strap allows the sling to be wrapped single, double, triple and rigged choker style depending on the particular situation. Manufactured from 2 inch super heavy duty webbing. D..
$92.70
SKU: 400
5-inch wide laminated foam waist pad with rear D ring for use in work
positioning and tactical situations. Easily slides on to fit most
unpadded Yates rescue and tactical harnesses...
$66.95
4-inch wide laminated foam waist pad with rear D ring for use in work
positioning and tactical situations. Waist pad is only 10 inches in length. Easily slides on to fit most
unpadded Yates rescue and tactical harnesses. Designed for attachment of anchor straps for rescue or Heli-Ops uses. NOT des..
$47.50
SKU: 405
Comfortable 5-inch wide laminated foam waist pad easily slides on to fit most unpadded Yates rescue and tactical harnesses...
$57.50
SKU: 411
1/4 inch laminated foam pads. Used on any unpadded shoulder portion of Yates full-body harnesses. Easily attached and removed with VELCRO®
brand fasteners...
$24.00
SKU: 412
Extra thick 3/8 inch thick contoured leg pad easily slides on to fit most unpadded Yates rescue and tactical harnesses...
$43.40
SKU: 413
Designed to complement the Yates Fall Safe Harness to add comfort where long hang times may be encountered. Lightweight, low profile design uses 1/4 inch laminated foam. Easily attached and removed
with VELCRO® brand fasteners...
$22.00
SKU: 414
Contoured 1/4 inch laminated foam pads. Used on any unpadded shoulder portion of Yates full-body harnesses with contoured straps. Easily attached and removed with hook and loop attachment...
$22.00
SKU: 425
Chest harness designed to be added to a compatible seat harness to create a Class III full-body harness. Includes front D ring for high point of attachment for belay line. Helps in keeping user upright.
Warning shoulder straps are not intended for vertical lifting. • One size, fully adjustable • Av..
$120.00
SKU: 438
Constructed of heavyweight vinyl truck tarp material for
increased durability. Orange bag measures 12 x 20 inches and is designed
to hold 18 inch long sections of 4x4 cribbing. Black bag measure 12 x
20 inches and is designed to hold 18 inch long wedges and shims.
Adjustable cinch strap secures ..
$104.00
SKU: 439
Used for patient pick-off situations. Made using 1.75-inch heavy-duty
resin treated webbing for high protection from abrasion and wear. Also useful as an adjustable anchor strap. Adjuster buckle can start to slip between 3,500 lbf and 4,500 lbf. If adjuster buckle is tied off full breaking strength..
$61.50
SKU: 442
Yates Adjustable Anchor Strap Adjustable length anchor or heavy-duty pick-off strap meets NFPA G requirements. It can be wrapped single, choker, or end to end. Pick-off strap configuration allows a 2 to 1 mechanical advantage for easier handling of the patient. Made using 1.75 inches 9000 l bf. (40k..
$112.00
SKU: 443
Yates Adjustable Anchor Strap Adjustable length anchor or heavy-duty pick-off strap meets NFPA G requirements. It can be wrapped single, choker, or end to end. Pick-off strap configuration allows a 2 to 1 mechanical advantage for easier handling of the patient. Made using 1.75 inches 9000 l bf. (40k..
$107.00
SKU: 444
Yates Adjustable Anchor Strap Adjustable length anchor or heavy-duty pick-off strap meets NFPA G requirements. It can be wrapped single, choker, or end to end. Pick-off strap configuration allows a 2 to 1 mechanical advantage for easier handling of the patient. Made using 1.75 inches 9000 l bf. (40k..
$124.50
SKU: 480
Extra-beefy gear bag with square corner design allows easy stacking.
Made of 1200 denier nylon ballistic cloth. Taped, triple stitched
seams. Heavy-duty zipper with wear flap. New Nylon COBRA buckles on handles allow for webbing configuration to secure closure over the zipper. COBRA buckles are in..
$165.00
SKU: 480SB
Extra-beefy gear bag with square corner design allows easy stacking.
Made of 1200 denier nylon ballistic cloth. Taped, triple stitched
seams. Heavy-duty zipper with wear flap. New Nylon COBRA buckles on handles allow for webbing configuration to secure closure over the zipper. COBRA buckles are in..
$165.00
SKU: 480ST
Extra-beefy gear bag with square corner design allows easy stacking.
Made of 1200 denier nylon ballistic cloth. Taped, triple stitched
seams. Heavy-duty zipper with wear flap. New Nylon COBRA buckles on handles allow for webbing configuration to secure closure over the zipper. COBRA buckles are in..
$165.00
SKU: 543
Specially designed to girth hitch to Yates escape belts and class II
seat harnesses that are used or integrated into turnout gear for extension of personal escape systems. Low profile, girth hitch design eliminates the need for additional or cumbersome carabiner connection to the harness. A small l..
$27.50
SKU: 558
Tool/Axe holder that fits most harnesses. Fits onto any webbing up to
1.75 inches. Hangs below belt to allow tilting of an axe, facilitating climbing stairs and ladders. An adjustable webbing top strap holds the tool in place. Fits axes, Halligan tool, and more...
$44.00
SKU: 6013
Available in forged steel. Steel is desired for longer wear, High gloss zink plating for improved corrosion resistance. Steel figure eights are ideal for training rappel situations when high cycle use is anticipated because of their resistance to grooving and excessive wear.
Steel figure eights do ..
$58.00
SKU: 816-12
Single leg lanyard is made from heavy-duty 1 inch, 9800 lbf. webbing, adjustable from 4-6 foot length.
Available with aluminum or steel ladder hooks. This allows the worker to safely connect at foot level. Ideal for transmission tower and wind turbine workers. Yates Gear has developed "State-o..
$173.00
SKU: 827-12
Single leg lanyard is made from heavy-duty 1 inch, 9800 lbf. webbing, adjustable from 4.5-6 foot length. 2.5" Aluminum Ladder Hook on adjuster end of Lanyard and 3/4" Steer snap hook on shock pack end of lanyard. This allows the worker to safely connect at foot level. Ideal for transmission tower an..
$233.00
SKU: 828
Kevlar Tower/Ladder Lanyard is designed for high heat environments. Lanyard is sewn entirely of heat resistant Kevlar webbing and thread. The shock absorber portion of the lanyard is covered with CarbonX material for added protection. Allows the firefighter to attach themself to a bucket or la..
$280.00
SKU: 950
The only IAFF approved harness designed to fit the Rescue Randy dummy
for use in the IAFF wellness/fitness CPAT test and training. Also makes a
great harness for positioning Rescue Randy in confined space training
and drills...
$182.00
Showing 1 to 47 of 47 (1 Pages)