Working-At-Height / Industrial Rope Access / Electric UtilitiesOUTER SHELL: ABS Plastic. INNER SHELL: HD Polystyrene. HEADBAND: PE Polythene. UNIVERSAL SIZE: Adjustable from 53 to 63 cm (6-3/8 – 7-3/4)WEIGHT: 400 g (14 oz)PPE Category: Type I – Class E STANDARD: Type I, Class C helmet based on ANSI..
Working-At-Height / Industrial Rope Access / Electric UtilitiesOUTER SHELL: ABS Plastic. INNER SHELL: HD Polystyrene. HEADBAND: PE Polythene. UNIVERSAL SIZE: Adjustable from 53 to 63 cm (6-3/8 – 7-3/4)WEIGHT: 400 g (14 oz)PPE Category: Type I – Class E STANDARD: Type I, Class C helmet based on ANSI..
Description: Working-At-Height / Industrial Rope Access / Technical Rope Rescue HelmetOUTER SHELL: ABS Plastic. INNER SHELL: HD Polystyrene. HEADBAND: PE Polythene. SIZE UNIVERSAL: Adjustable 51-62cm. WEIGHT: 450g/0.99 lb (visor and ear muffs are not included). STANDARD: Type I, Class C helmet based..
Description: Working-At-Height / Industrial Rope Access / Technical Rope Rescue HelmetOUTER SHELL: ABS Plastic. INNER SHELL: HD Polystyrene. HEADBAND: PE Polythene. SIZE UNIVERSAL: Adjustable 51-62cm. WEIGHT: 450g/0.99 lb (visor and ear muffs are not included). STANDARD: Type I, Class C helmet based..
We have contracted with CMC Rescue to produce this (Flame Resistant)
FR version of their popular Sunbrero for the utility industry. It will fit both Petzl and the new KASK Zenith E Rated Helmets.It is constructed from Nomex fabric and Kevlar seam tapes.FR
Sunbrero certified by Arcwear™ to meet s..
1-inch mil-spec type 18 is regarded as the best webbing to use for heavy-duty rigging applications. Shuttle loom flat webbing construction offers superior abrasion resistance. Because of the resin finish on type
18 webbing it is recommended that the webbing be washed in warm water and air-dried be..
SKED-EVAC Industrial TripodManufactured
by Skedco, makers of the Sked® Stretcher, the Sked-EVAC tripod features
aircraft-grade, gold-anodized aluminum legs and a cast-aluminum head.
Three heavy-duty rigging anchors, located in the center, have
exceptionally large holes for easy attachment. L..
Rigging collection ring useful for many rigging and rescue applications. Drop forged alloy steel.X-Small: Strength 5000 lbf/22kN, 3/8 inch x 1.50 inch diameter ID, 2.26 inch diameter OD.Small: Strength 5000 lbf/22kN, 3/8 inch x 2.29 inch diameter ID, 3.00 inch diameter OD.Large: Strength 10,000 lbf/..
Rigging collection ring useful for many rigging and rescue applications. Drop forged alloy steel.X-Small: Strength 5000 lbf/22kN, 3/8 inch x 1.50 inch diameter ID, 2.26 inch diameter OD.Small: Strength 5000 lbf/22kN, 3/8 inch x 2.29 inch diameter ID, 3.00 inch diameter OD.Large: Strength 10,000 lbf/..
Rigging collection ring useful for many rigging and rescue applications. Drop forged alloy steel.X-Small: Strength 5000 lbf/22kN, 3/8 inch x 1.50 inch diameter ID, 2.26 inch diameter OD.Small: Strength 5000 lbf/22kN, 3/8 inch x 2.29 inch diameter ID, 3.00 inch diameter OD.Large: Strength 10,000 lbf/..
The RED is a simple, yet highly effective back-up device.The RED's
non-aggressive Cams have a positively locking spring, which means that
the device is self-parking (rather than self-tailing, like many ropes
grabs). This self-parking function is important for Rope Access work
techniques as t..
Designed for extra load absorbing qualities of dynamic ropes. The
supple hand of these specially engineered prusik cords, combined with
their shock-absorbing capacity has set another new standard for added
safety in a rescue system.Price is per foot.6.5 mm cord MBS: 2,200 lbf. / 9.7 kN7 mm cor..
Designed for extra load absorbing qualities of dynamic ropes. The
supple hand of these specially engineered prusik cords, combined with
their shock-absorbing capacity has set another new standard for added
safety in a rescue system.Price is per foot.6.5 mm cord MBS: 2,200 lbf. / 9.7 kN7 mm cor..
Pre-rigged 4:1 mechanical advantage kit contains all necessary equipment needed for a pig-rig (piggyback,
ganged-on) raising system. 4:1 pre-rigged raising systems are recognized as the quickest to employ and the most efficient systems used today in standard low and high angle rescue. Less set up ..
Utilizes a highly efficient tear-stitch webbing to absorb energy by
means of controlled destruction. Two layers of webbing are woven
together in a prescribed manner. The 801 is very useful as a shock
absorber in belay, mechanical advantage, hauling and highline systems.The tear tap..
Utilizes a highly efficient tear-stitch webbing to absorb energy by means of controlled destruction. Yates Shock Absorbers are now produced with this new Dyneema® fiber tear tape is quite
unique. It passes both 6 ft Free Fall(Factor 1) and 12 Ft Free
Fall(Factor 2) criteria. The 6/12 tear t..
Basic kit designed to give first responders the equipment necessary to make initial access to a vehicle off the road on a steep slope or cliff situation. Equipment can be used to set up a rappel, belay or hand line to achieve access to a victim in a safe manner. An ideal kit for an ambulance or patr..
Includes necessary equipment required for individual rescue
personnel. Kit includes a helmet with headlamp, hand protection, safety
harness, and personal rappel and belay equipment.1 Voyager or Voyager Riggers Harness (Optional w/ Tech Rescue II Harness, Kit Number: 8021) 1 KASK Super Plasma Hel..
Includes necessary equipment required for individual rescue
personnel. Kit includes a helmet with headlamp, hand protection, safety
harness, and personal rappel and belay equipment.1 Voyager or Voyager Riggers Harness (Optional w/ Tech Rescue II Harness, Kit Number: 8021) 1 KASK Super Plasma Hel..
All the basic equipment needed to rig a mainline lowering or raising and belay system except for the ropes. Kit includes hardware, lowering device, edge protection, and anchor rigging. Equipment is stored in
Yates/Evac Tech Rescue Equipment Pack for easy transport and sorting on
the scene.1 Petz..
Complete package of equipment needed for most low angle and high angle cliff rescue operations. Equipment provided for mainline lowering or raising and belay system including hardware, lowering device, edge protection, and anchor rigging. Stored in Yates/Evac Tech Rescue
Equipment Pack and Yates R..
Kit includes the equipment needed for a two-person confined space
standby team. Included is two Confined Space Rescuer Personal Equipment
Kits plus necessary standby team equipment. Confined Space Standby kit
can be combined with the Confined Space Entry Kit (item 8070) to equip a four-person ..
This kit includes the necessary equipment required for individual
rescue personnel to make entry into a vertical confined space situation.1 Yates Heavy Rescue Harness or Fall Safe Pro Harness 1 KASK Super Plasma Helmet 1 Petzl Tikka XP Headlamp 1 Pair Ringers Rope Gloves 2 DMM Yates TriLock Carabi..
A complete kit for gaining vertical entry into a confined space.
Includes all the necessary hardware and rope to provide an entrant/access line and belay or retrieval line. This kit is designed to be combined with the Confined Space Rescuer Personal Equipment Kit (item 8060).
Confined Space Entr..
Single leg lanyard is made from heavy-duty 1 inch, 9800 lbf. webbing, adjustable from 4-6 foot length.
Available with aluminum or steel ladder hooks. This allows the worker to safely connect at foot level. Ideal for transmission tower and wind turbine workers. Yates Gear has developed "State-..
Lanyard leg is made from heavy-duty 1 inch, 9800 lbf. webbing,
adjustable from 4-6 foot length. Available with aluminum or steel ladder hooks. This allows the worker to safely connect at foot level. Ideal for stage rigging and entertainment industry workers who need subdued color equipment. • Max..
Single leg lanyard is made from heavy-duty 1 inch, 9800 lbf. webbing, adjustable from 4.5-6 foot length. 2.5" Aluminum Ladder Hook on adjuster end of Lanyard and 3/4" Steer snap hook on shock pack end of lanyard. This allows the worker to safely connect at foot level. Ideal for transmission tower an..
Kevlar Tower/Ladder Lanyard is designed for high heat environments. Lanyard is sewn entirely of heat resistant Kevlar webbing and thread. The shock absorber portion of the lanyard is covered with CarbonX material for added protection. Allows the firefighter to attach themself to a bucket or la..
Manufactured from heavy duty 1 inch 9800 lbf. webbing. Available in
fixed lengths. Work positioning only. Made with steel snap hooks. • Strength 5000 lbf. • Meets ANSI Z359.1-1992 standards..
Manufactured from heavy duty 1 inch 9800 lbf. webbing. Available in
fixed lengths. Work positioning only. Made with steel snap hooks. • Strength 5000 lbf. • Meets ANSI Z359.1-1992 standards..
Manufactured from heavy duty 1 inch 9800 lbf. webbing. Available in
fixed lengths. Work positioning only. Made with steel snap hooks. • Strength 5000 lbf. • Meets ANSI Z359.1-1992 standards..
Manufactured from heavy duty 1 inch 9800 lbf. webbing. Available in
fixed lengths. Work positioning only. Made with steel snap hooks. • Strength 5000 lbf. • Meets ANSI Z359.1-1992 standards..
Manufactured from heavy duty 1 inch 9800 lbf. webbing. Available in
fixed lengths. Work positioning only. Made with steel snap hooks. • Strength 5000 lbf. • Meets ANSI Z359.1-1992 standards..
Lanyard leg is made from heavy-duty 1 inch, 9800 lbf. webbing,
adjustable from 4.5-6 foot length. Available with aluminum or steel ladder hooks. This allows the worker to safely connect at foot level. Ideal for stage rigging and entertainment industry workers who need subdued color equipment. • M..
The tear tape used in this Tie-Back Lanyards is quite unique. Great for welding applications. It passes both 6 ft Free Fall(Factor 1) and 12
Ft Free Fall(Factor 2) criteria. The 6/12 tear tapes start activation at 900 lbf. average activation, then half way threw the deployment distance it ram..
Twin lanyard legs are made from heavy-duty 1 inch, 9800 lbf. webbing,
adjustable from 4.5-6 foot length. Available with steel 2.5 inch ladder hooks. This allows the worker to safely connect at foot level. Ideal for transmission tower and wind turbine workers. Yates Gear has developed "State-o..
Twin lanyard legs are made from heavy-duty 1 inch, 9800 lbf. webbing,
adjustable from 4.5-6 foot length. Available with aluminum 2.5 Inch ladder hooks. This allows the worker to safely connect at foot level. Ideal for transmission tower and wind turbine workers. Designed for sternal as well a..
Twin lanyard legs are made from heavy-duty 1 inch, 9800 lbf. webbing(Black),
adjustable from 4.5-6 foot length. Available with aluminum 2.5 inch ladder hooks. This allows the worker to safely connect at foot level. Ideal for transmission tower and wind turbine workers. Designed for sternal as well..
876-5B 4 to 5 ft. length Adjustable, Twin Leg Energy Absorbing Lanyard for Lightweight Users (100 to 200 lbs. including harness and tools)Certified by Sturges Mfg. to the ANSI Z359.13-2013 StandardThe material used in the construction of the energy absorber is nylon.Twin leg, energy absorbing lanyar..
Twin lanyard legs are made from 2 inches elasticized webbing, self-adjusting adjustable from 4.5-6 foot length. Available with aluminum or steel ladder hooks. This allows the worker to safely connect at foot level. Ideal for Wind Tower uses where twin Leglanyards are required with Rescue D-Rings Ava..
Twin lanyard legs are made from 2 inches elasticized webbing, self-adjusting adjustable from 4.5-6 foot length. Available with aluminum or steel ladder hooks. This allows the worker to safely connect at foot level. Ideal for Wind Tower uses where twin Leglanyards are required with Rescue D-Rings Ava..
Forehead and chin restraint straps for Spec
Pak. Re-usable chin and forehead straps are vinyl-coated Nylon and foam. Easily decontaminated. Replacement straps sold in pairs...
Patient packaging and extrication system combine the backboard immobilization of a shortboard with the suspension and support of a full-body harness.The Spec Pak system utilizes an integrated polyethylene board along the back to reduce wear and create a smooth sliding surface for confined space oper..
Forehead and chin restraint straps for
Spec Pak. Re-usable chin and forehead straps are vinyl-coated Nylon and foam. Easily decontaminated. Replacement straps sold individually...
Patient packaging and extrication system combine the backboard immobilization of a shortboard with the suspension and support of a full-body harness.The Spec Pak system utilizes an integrated polyethylene board along the back to reduce wear and create a smooth sliding surface for confined space oper..
Patient packaging and extrication system combine the backboard immobilization of a shortboard with the suspension and support of a
full-body harness. The Spec Pak system utilizes an integrated polyethylene board along the back to reduce wear and create a smooth sliding surface for confined space o..
Patient packaging and extrication system combine the backboard immobilization of a shortboard with the suspension and support of a full-body harness. The Spec Pak system utilizes an integrated polyethylene board along the back to reduce wear and create a smooth sliding surface for confined space ope..
904C New X-Collar - Clear.
The Yates Gear XCollar is designed by emergency care professionals to
address the common deficiencies of other cervical immobilization devices
by featuring enhanced immobilization, adjustment after application,
immobilization in position of comfort and the ability ..
Spec Pak Spreader Bar was designed for Wind Turbine rescue techniques that require the horizontal transfer of a patient. Spreader Bar is connected to Chest D-rings on Spec Pak. This technique utilizes two 4:1 Mini
Haul or AZTEC kits attached to the swivel on the spreader bar to move a
patient in..
(Spec
Pak will not function in all lifting modes without the use of Lifting
Bridles). The use of Lifting bridle is recommended for use in most
lifting operations. The upper D ring attachment should only be used for
short duration lifts 5-10 minutes. Standard Lifting Bridal System (905) is in..
NEW Spec
Pak Intrinsically Safe (Non-Sparking) Spreader Bar was designed confined space operations when extended hand times orf a patient is anticipated. Spreader Bar is connected to chest D-rings on Spec Pak.
Spreader Bar is attached to a 2:1 Pick off the strap of the suspension
system t..
New Spec Pak Spreader Bar was designed for Wind Turbine rescue techniques that require the horizontal transfer of a patient. Spreader Bar is connected to chest D-rings on Spec Pak. This technique utilizes two
4:1 Mini Haul or AZTEC kits attached to the swivel on the spreader bar to move a patient ..
The latest in victim extraction and rescue. The A.R.V. brings together fast donning and rapid extraction for short-haul and hoist operations. Adjustable for a one size fits all application to accommodate patients from 50 to 400 lbs. The easy side adjustment system provides for patient positioning al..
Great fingertip dexterity and a unique gel-padded rope control channel make these gloves a must for the rope professional. Excellent durability and fit. Sizes S-XXL. Available in black or red.Premium synthetic leather palm and fingertip patchesFoam padded rope control channel on palmHeavy-..
911 Cave Rescue Spec Pak is a modified version of the Spec Pak system specifically designed for Cave and Mine Rescue operations. Lifting bridle is included (Spec Pak will not function in all lifting modes
without the use of the lifting bridle).Patient packaging and extrication system combines the ..
Firefighters, EMT's, Track Safety Workers and other First Responders recognize the need for a puncture and abrasion resistant glove with great dexterity. This glove fills those needs and fits like a second
skin.High visibility for increased safetyFlexible TPR impact protection on knuckles and fing..
Thick full-grain leather second palm extends over the,palm and to
the second joint of your fingers to provide added protection from the
heat and friction generated when fast roping. The index finger is
separated for trigger finger dexterity. Also excellent for tactical and
help rappel use. C..
Thick full-grain leather second palm extends over the,palm and to
the second joint of your fingers to provide added protection from the
heat and friction generated when fast roping. The index finger is
separated for trigger finger dexterity. Also excellent for tactical and
help rappel use. C..
The only IAFF approved harness designed to fit the Rescue Randy dummy
for use in the IAFF wellness/fitness CPAT test and training. Also makes a
great harness for positioning Rescue Randy in confined space training
and drills...
Made for Yates Gear by Rescue Source(RQ3) Equipment. Duffel is an easy solution for any storage and
organizational problems. This all-around efficient gear duffel is sure
to make your life more convenient when you can just grab your gear and
go!
Features include:Made with 1680D polyester and ..
Unique tool tether with an integrated bungee cord. Retracted length 33
inches, full extension 58 inches. One end is designed with half twist to allow for girth hitching of tools. Strength 450lbf. 4kN(Static
Testing). WLL 10 lbs(Dynamic loading Per ANSI/ISEA 121-218 Test criteria)...
Unique tool tether with integrated bungee cord and attached 2 stage carabiner. Carabiner has a captive pin to keep it from coming off of the teather. Retracted length 36 inches, full extension 60 inches. One end is designed with half twist to allow for girth hitching of tools.
Strength 450lbf. 4kN..
DescriptionWide seat for working comfortably during suspensionComes
with two RING OPEN connectors that install in the side slots of the
VOLT harnesses to distribute the load between the waistbelt and seatCan be used with a spreader bar to create a central attachment pointStows easily in the uppe..
Folding hook designed to accommodate Yates Assault Ladder and Pole system. Folds flat for easy carrying in the kit. Carbide teeth on contact surface aid in gripping cement edges on window sills or rooftops. Hooks can also be used with Pocket Ladder. Shown in 7-inch length. Smaller 4
inch size also..
Folding hook designed to accommodate Yates Assault Ladder and Pole system. Folds flat for easy carrying in the kit. Carbide teeth on contact surface aid in gripping cement edges on window sills or rooftops. Hooks can also be used with Pocket Ladder. Shown in 7-inch length. Smaller 4
inch size also..
Harness Chest Ascender attachment strap. Can be used on any Yates full body harness that utalizes Trapazoid attachment between seat and chest portion of the harness. (380, 380R, 387, 387P, 390, 390FRA/FRC, 384, 386 Harnesses)..
Descender with integrated progress-capture pulley for loads up to 250 kg, compatible with 10.5 to 11.5 mm ropesDescription
Great versatility, ideal for technical rescue:- locking system with integrated progress-capture pulley allows the same device to be used fo..
Descender with integrated progress-capture pulley for loads up to 250 kg, compatible with 10.5 to 11.5 mm ropes
Description
Great versatility, ideal for technical rescue:- locking system with int..
Dita: K-9 Operator’s Fast Rope Accessory Kit Kit Components:X 1 NSWDG-DG-2 Dog Free Y Bridle Retail (W/3 Kong Tangos) X 1 566 Personal Retention Lanyard ( RED ) X 1 NSWDG-HL Short Hand Loop ( RED ) X 1 1839 Roc..
DMM Vault Tool Holder that fits 390 Harness, 387 and 380 Harnesses.The Vault is a secure and durable tool holder that can be used on everything from harnesses and kit bags to vehicles.The two-part aluminum alloy Vault is secured using a stainless steel bolt
and is the ideal solution for ..
Fast
Rope Insertion & Extraction Systems provide efficient and safe methods for inserting and evacuating personnel to and from specific targets. Fast Ropes are available in several stock variations and can also be made in any custom length. We can furnish the Fast Rope with or without the FRIE..
YATES Buck Hook replacement rope for the man-up kit (1424-14SSE-G-WB).
12mm Dry coated BlueWaters ArmorTech™ rope which is perfect for applications where improved cut resistance or heat resistance is demanded. This is a DOUBLE SHEATH rope design. The 100% Technora aramid outer sheath has superior ..
YATES Buck Hook rope kit for first man-up. Kit contains the main lifeline to be attached to Buck Hook pole utilized by the first man up procedure for tower climbing while maintaining 100% fall protection. Kit utilizes
12mm Dry coated BlueWaters ArmorTech™ rope which is perfect for applications whe..
The first device allowing safe and speedy insertion of troops carrying Heavy Loads.These kits allow an operator to take a dog, a person who can not FAST rope down a FAST rope. Made by Trango.The kit includes:FRDD Device w/ CarabinerY-Bridle/LanyardCanine/Load Retention LanyardFRIES Daisy Chain Quick..
YATES
GEAR now offers re-slinging service for most makes and
models of camming devices.YATES GEAR is the US authorized service center for re-slinging
cams for WILD COUNTRY and DMM.
Most factory colors and sizes can be matched.
Webbing for re-slinging: 11/16 Nylon
Webbing an..
Designed to allow easy and secure transfer Grounding Bars to transmission towers during Short Haul Operations. Designed in conjunction with PG&E. The Grounding Bar System is attached to the
Short Haul Grapple hook via a 3 ft. sling that is shackled to the
MoHook. MoHook and Groundi..
Designed by CAMP DOJ Marijuana eradication long lines short-haul programs. 15 ft. Cobiner strap constructed from mil-spec type 18 webbing. The steel O ring is sewn into one end to allow easy girth hitching of the strap around cut down Marijuana plant bundles. Dope bundles can be easily at..
The NEW D4 Pro Work/Rescue Descender features a unique and innovative cam action, which offers precise control at slow or fast speeds. The progressive cam works by way of one cam operating inside another cam. The anti-panic function of the control handle makes this descender ANSI/OSHA Compliant.The ..
ISC D5 Descender The
new D5 by ISC is a double stop device.Wear parts approach the point of
indestructibility. Handle is made of aluminum (as opposed to plastic),
and is extremely durable. The
D5 Descender allows for controlled descent at different speeds. A user
can move slowly..
ISC D5Y Descender In stock now. The new D5Y was exclusively designed for Yates by ISC it is a double-stop
device. Wear parts approach the point of indestructibility. The handle is made of aluminum (as opposed to plastic), and is extremely durable. The
D5Y Descender allows for controll..
Visors designed specifically for the Kask Super Plasma Helmets.
Available in Clear, Smoke or Mirror. Addition of visor is great enhanced
eye protection.Great for uses like Helicopter Short Haul, Rock
Scaling, Technical Rescue or any job where flying or falling debris are a concern.Visors avail..
Visors designed specifically for the Kask Super Plasma Helmets.
Available in Clear, Smoke or Mirror. Addition of visor is great enhanced
eye protection.Great for uses like Helicopter Short Haul, Rock
Scaling, Technical Rescue or any job where flying or falling debris are a concern.Visors avail..
Visors designed specifically for the Kask Super Plasma Helmets.
Available in Clear, Smoke or Mirror. Addition of visor is great enhanced
eye protection.Great for uses like Helicopter Short Haul, Rock
Scaling, Technical Rescue or any job where flying or falling debris are a concern.Visors avail..
Visors designed specifically for the Kask Zenith Helmets. Available
in Clear or Smoke Addition of the visor is greatly enhanced eye protection.Great
for uses like Helicopter Short Haul, Rock Scaling, Technical Rescue or
any job where flying or falling debris is a concern.Visor
helmet adapter..
Visors designed specifically for the Kask Zenith Helmets. Available
in Clear or Smoke Addition of the visor is greatly enhanced eye protection.Great
for uses like Helicopter Short Haul, Rock Scaling, Technical Rescue or
any job where flying or falling debris is a concern.Visor
helmet adapter..
Visors designed specifically for the Kask Zenith Helmets. Available
in Clear or Smoke Addition of the visor is greatly enhanced eye protection.Great
for uses like Helicopter Short Haul, Rock Scaling, Technical Rescue or
any job where flying or falling debris is a concern.Visor
helmet adapter..
Ladder standoffs are designed to create distance between the objective and ladder when climbing ladders pressed against a ship’s hull, building, or cave. The distance is enough for a fully gloved user to grip ladder rungs while ascending, no more climbing ladders on your toes or fingertips. Molded s..
Rock Exotica 2.6 Inch Material Handling BlockRock Exotica's
Material Handling Block features a red sideplate to easily differentiate
it from the Rock Exotica P55 Omni Block Pulley. This Omni Rigging Block
offers a WLL of 4,500 lbs. The integrated swivel allows the block to
orient while reduc..
Designed to allow easy and secure transfer of equipment to transmission towers during Short Haul Operations. MoHook
Kit allows the transmission tower worker to efficiently short haul
there Tool/Bolt/Grunt bags or Grounding Bars into towers. The MoHook Kit
System is attached to the Short Haul G..
Designed to allow easy and secure transfer of equipment to transmission towers during Short Haul Operations. MoHook
Short Haul Equipment System allows the transmission tower worker to
efficiently short haul there Tool/Bolt/Grunt bags into towers. The
MoHook System is attached to the Short Haul..
ISC Ropegrabs can be used on work positioning lanyard/ flip lines.Compact fixed rope clamp/grab intended for moving on fixed ropes.SWL on 12mm Armortech Rope - 1.5kN (337 lbf.)Rope diameter range (mm)10.5 - 13(MBS) Minimum Breaking Strength (kN)Dependant on Rope TypeCam materialAluminumFinishAnodise..
SPRAT48 Sternal Attachment 48" Lanyard w/ 2.5 Inch Aluminum Hook.
100%
Tie Off twin lanyard legs are made from 12 mm BlueWater Armortech Rope
and 2.5" opening aluminum ANSI Certified Large Snap Hooks. Certified for 6 ft Freefall Potential. Designed
specifically for Rope Access Work and Tra..