Yates Gear has developed "State-of-the-art" technology in shock absorbing tear tapes.Past
generation tear tapes all required a structural backup webbing following the tear tapes to accomplish the 22kN (5,000 lbf) ANSI required ultimate strength. YATES latest technology has incorporated
YATES 1.4 lb Weight bag w/Prussic and tool tether locking carabiner. Used to allow Petzl ASAP Back-up device to roll freely on any vertical lifeline.
Weight bag is made from 2" Tubular webbing for durability, filled with
steel shot.Weight Bag 20 oz. $25Prussic for weight bag $8.50Mini Auto..
100' x 12mm Dry coated BlueWaters ArmorTech™ rope which is perfect for applications where improved cut resistance or heat resistance is demanded. This is a DOUBLE SHEATH rope design. The 100% Technora aramid outer sheath has superior cut resistance over regular synthetic fibers.
The inner sheath i..
Small rigging plate ideal for SAR, tactical and stage rigging applications. Made of 3/16 inch 7075-T6 aircraft aluminum. Length 3.3
inches, width 3.6 inches Hole size .75 inch (19mm). Strength 6750 lbs
Durable heavyweight construction specifically designed for rigging and rescue applications. These are no lightweight rock climbing ascenders! Easy to operate with a gloved hand, these ascenders come with
large thumb release on cam, large molded handgrip, and double clip-in
points. Unique cam des..
Small rigging plate ideal for all technical rescue rigging applications. Made of 3/8 inch high strength 6061-T6 aircraft aluminum.
Length 4 inches, width 4.4 inches. Hole size .75 inch (19mm). Strength
10,000 lbf. (44kN)...
Medium-sized rigging ring ideal for all technical rescue rigging applications. CNC milled from 1/2" thick high strength 7075-T6 aircraft aluminum Plate. Durable "Hard Coat" anodized. Currently under certification with UL for NFPA "G" and ANSI Z359.1. Individually proof loaded to 3,600 lbf. YATES Rig..
Medium rigging plate ideal for all technical rescue rigging applications. Made of 3/8 inch high strength 6061-T6 aircraft aluminum.
Length 6.5 inches, width 4.25 inches. Hole size .75 inch (19mm).
Strength 10,000 lbf. (44kN).• Available in black and red• NSN# 4240015574889 (For Black Rigging pla..
Designed as a personal escape descender for firefighters in bailout situations. Works well on single and double ropes up to 7.5 mm, and can
be used on single ropes up to 12.5 mm. • CNC machined from 3/8 inch thick aircraft aluminum • Compact size and lightweight • The single or double wrap allows ..
Designed for strength and durability. Unique side plate design keeps the rope from rubbing on any surface which comes in contact with the pulley. Sheave diameter of 2 inches. Accommodates ropes from 9 to
13mm. Strength 9000 lbf. (40kN). Made in WALES by ISC...
New style Figure 9 descender with attachment eye set 90 degrees to the
rest of the unit. The Figure 9 also has a top spike which easily allows
rope to be wrapped over the top for added friction and control of
heavier loads. Forged aluminum, hard coat anodized...
Original design figure eight has many uses in work and rescue such as rappelling, belaying and lowering. Manufactured of forged alloy aluminum and hard coat anodized for extended wear. Rig point will allow
multiple carabiners to pass through the hole.• Classified to meet NFPA 1983/2012 edition sta..