Designed as a personal escape descender for firefighters in bailout situations. Works well on single and double ropes up to 7.5 mm, and can
be used on single ropes up to 12.5 mm. • CNC machined from 3/8 inch thick aircraft aluminum • Compact size and lightweight • The single or double wrap allows ..
New style Figure 9 descender with attachment eye set 90 degrees to the
rest of the unit. The Figure 9 also has a top spike which easily allows
rope to be wrapped over the top for added friction and control of
heavier loads. Forged aluminum, hard coat anodized...
Original design figure eight has many uses in work and rescue such as rappelling, belaying and lowering. Manufactured of forged alloy aluminum and hard coat anodized for extended wear. Rig point will allow
multiple carabiners to pass through the hole.• Classified to meet NFPA 1983/2012 edition sta..
Similar to the standard 4 bar U-Rack in a narrower size for single
rope. The Micro U-Rack provides even distribution of weight between both
sides of the rack doesn't twist rope, as can occur when using a
figure 8 type descender and may be used with single ropes of varying
diameters without t..
One of the most widely used descent and lowering devices available.
It will accept single or double ropes of several diameters and yet
provides a wide range of friction for descent control or lowering
control. Allows the user to change the number of bars as necessary when
in use with a load...
This compact rack is fitted with 4 long-wear tubular stainless bars,
two of which are tie-off bars. This rack design allows the user to vary the friction without adding or dropping bars or disconnecting from the system like traditional racks, whether it is being used in a controlled,
Available in forged steel. Steel is desired for longer wear, High gloss zink plating for improved corrosion resistance. Steel figure eights are ideal for training rappel situations when high cycle use is anticipated because of their resistance to grooving and excessive wear.
Steel figure eights do..
Designed for experienced rope access workersEasy to use:-
safety gate on the moving side plate allows the rope to be installed
easily while the device remains connected to the harness, facilitating
the passage of intermediate anchors- easy rope installation, thanks to the rope guide and markin..
Designed for technical rescueEasy to use: - safety gate on the moving side plate allows the rope to be installed easily while the device remains connected to the harness- easy rope installation, thanks to the rope guide and markings - anti-error catch to reduce the risk of an accident due ..
Designed for work at height and rope access workEasy to use: - safety gate on the moving side plate allows the rope to be installed easily while the device remains connected to the harness- easy rope installation, thanks to the rope guide and markings - anti-error catch to reduce the risk ..
Descender with integrated progress-capture pulley for loads up to 250 kg, compatible with 10.5 to 11.5 mm ropesDescription
Great versatility, ideal for technical rescue:- locking system with integrated progress-capture pulley allows the same device to be used fo..