A full body harness and tactical load bearing vest are combined offering a unique product for civilian Special Operations and SWAT personnel. This modular harness and tactical vest combination was originally developed by Survival Inc. as the Joint Services Aircrew Vest and Extraction System™ (JSAVES) for US Air Force helicopter
pilots and crew. Some additional features and add on modules were added for civilian Special Ops needs. Comes with front attachment points which when connected with a locking carabiner can be used for extraction or rappel applications. A rear dorsal D ring is provided for helicopter spotter or gunner lanyard attachment. Easily donned by use of quick connect double release action buckles on waist, sternum and leg loops. Leg loops are stowed in concealed pockets on the bottom of the vest until needed. 4 inch padded waist pad and removable leg pads are provided. Tactical load bearing vest is designed using the latest military Modular Lightweight Load Carrying Equipment (MOLLE) system to easily attach desired pockets, ammo
pouches and weapons. The vest does not come with any pockets or pouches. Molded rubber drag handle included on rear of vest.

Weight 5 lb. 12 oz. with vest.
• One size, fully adjustable
• Available in terra and black
• Additional attachments include floatation vest and rescue swimmer attachment.

Designed for use as a full body harness for insertion and extraction applications. This harness system also works well for emergency egress from multistory buildings or rooftops. Sternum level attachment point allows an injured or wounded soldier to be lowered
and remain in an upright position. Cobra quick connect buckles on leg portion of harness for easy and fast donning. Designed to be worn over tactical web gear and body armor.

Weight 1 lb. 12 oz. Made in USA.
• One size fits all
• Available in terra
• (566) Extraction/Personal Retention Lanyard not included.

Specially designed for rapid rappel and extraction operations. The waist and sternum buckles have secondary velcro safety closure over buckles. Mil spec load bearing vest shoulder straps are sewn into the harness allowing the harness to be worn under any military load bearing vest by replacing the existing harness straps
with the Stabo straps and connecting the Alice clips of the vest the the waist of the harness. Leg pouches on the harness allow for leg loops to be stowed away when not in use. Currently being used by many DEA, FBI, BLM, Army Rangers and Special Forces personnel. Redesigned in 2004 to meet FAA TSO approval for use as a short
haul harness. Contrasting brown thread for visual inspection. Weight 4 lb. 11 oz.
• One size, fully adjustable and in small
• Large D ring for multiple connections
• Shoulder D rings included
• Certified to NFPA 1983/2001 ed. standards
• Certified to ANSI/OSHA and CAN/CSA full body harness standards

22 inch lanyard made of 7000 lbf. nylon webbing. Designed to
girth hitch to dorsal D ring of YATES Stabo or YATES Extraction harness for SPIE extraction operations.

• DMM Green Tactical OvaLock 3 Stage aluminium carabiner w/captive pin included.

QR Personal Retention Lanyard
Designed using the first all black, non reflective, oxide plated
quick release shackle made of stainless steel by Ronstan. Heavy duty
plunger springs and precision components ensure dependable service. Built with mil spec 5625 tubular webbing. Strength 3500 lbf. (15kN). Made in USA.
• Available in black and sand
• Length retracted 21 inches
• Length fully extended 32 inches
• Length extended with carabiner 36 inches
• Grade 15-5PH investment cast stainless steel body and hasp
• Grade 316 stainless steel plunger pin and spring

Extraction/Personal Retention Lanyard
For use as a personal retention and extraction lanyard. Designed to
girth hitch to users harness and connect to extraction point via
unique aluminum snap hook. Built with mil spec. 5625 tubular webbing,
this lanyard tests over 3400 lbf. (15kN) breaking strength. Kong
Tango double locking snap hook is classified to meet NFPA 1983/2006
edition standards. Strength 7425 lbf. (33kN). Made in USA.
• Available in black and sand
• Length retracted 22 inches
• Length fully extended 32 inches

Well suited for all rescue, military, SWAT and tactical applications where a Class II harness is utilized. Similar to the standard Assault Harness with quick adjust waist buckle system for easier entry. D ring used for main attachment point. Weight 1 lb. 8 oz.
• One size, fully adjustable
• Available in terra, black and foliage green
• Quick leg adjustment with camlock buckles
• All hardware plated or epoxy coated in color
• One gear rack
• Meets ANSI/OSHA Class II harness standards

• Available in colors: Black, Terra, Foliage Green

Padded version of our popular Lightweight
Assault Harness. Waist and leg pads are constructed
of 3/8 inch laminated foam and cordura
fabric for comfort and durability. 5 inch wide
waist pad is available with rear structural D ring
for positioning applications. Waist pad with rear
D ring can be reversed for use in tactical
“Australian Rappel” applications. Leg pads are 4
inches wide and contoured to provide superior
comfort and function. Weight 2 lb. 3 oz.
• Sizes: S, M, L, XL
• Quick leg adjustment with camlock buckles
• All hardware plated or epoxy coated black
• One gear rack
• Meets ANSI/OSHA Class II harness standards

• Available in colors: Black, Terra, Foliage Green

Offers upper chest D ring connection to the Assault or Lightweight Assault Harness converting them to a full body Class III harness. Chest portion is easily donned over tactical body armor using camlock buckle. Chest D ring can be used for attachment of belay line while allowing the user to rappel
or be lowered from the seat portion of the harness. Chest D ring is also useful as an extraction connection point.
• One size, fully adjustable

• Available in colors: Black, Terra, Foliage Green

Same as our standard Uniform Rappel belt sewn with camlock waist buckle in narrower 1.5" version for pants with small belt loops.
Front V ring used for attachment point. Made with 6,000 lb webbing. Strength 4000 lbf.
• One size, fully adjustable and XL
• Available in colors: Black, OD Green, Terra, Foliage Green

Same as our uniform/BDU belt sewn with camlock waist buckle in a narrower 1.5 inch version for pants with smaller belt loops. Made with 6,000 lb webbing. Strength 4000 lbf.

• One size, fully adjustable and XL
• Available in colors: Black, Terra, Foliage Green

NEW REDUCED PRICE!!!!

Specially designed for tactical applications. Can be worn as a belt and turned into a rappel seat by removing the leg portions of the harness from waist pocket. Utilizes Interlocking mating adjustment buckle system that allows for fast application. Leg straps can be quickly packed away in waist pocket when harness is turned back into a belt. Optional 5 inch waist pad is designed to accept military Alice clips for addition of military style gear and ammunition pouches (items
400 or 405). Weight 1 lb. 12 oz.
• One size, fully adjustable
• Available in terra, black and foliage green
• All hardware plated or epoxy coated in color
• Meets ANSI/OSHA Class II harness standards

• Available in Black

Designed in conjunction with military Special Ops units this harness is worn as a duty belt on users BDU’s. Stiffener webbing is sewn inside the belt area of the harness to support wearing side arm. Leg portion can be quickly donned by opening the pouch
and securing the leg loop portions with quick connect aluminium COBRA buckles. Harness attachment point is well suited for all rappel and extraction situations. Weight 1 lb. 6 oz.
• Sizes M and L
• Utilizes slot webbing construction

• Available in colors: Black, Terra, Foliage Green

A totally new concept in tactical harness and belt design. Designed
in conjunction with military special ops units, this harness is worn
as a CQB belt on users BDU’s. Two layer webbing on the belt area of
the harness supports wearing side arm. Leg portion can be quickly
donned by releasing webbing keepers, pulling seat strap between legs and clipping to waist loop with carabiner. Attachment point is well
suited for all rappel and extraction situations. Certified by NATICK
Soldier Research Development and Engineering Center to meet MIL STD 858, Test Methods T102, modified for extraction harnesses. Weight 1 lb. Carabiner not included.

• Sizes M and L
• Available in terra and black

Designed in conjunction with LAPD SWAT, this new harness utilizes a fully padded structural duty belt which is designed to replace the
existing padded duty belt worn by SWAT Officers. Super stiff scuba webbing is sewn to the outside of the belt to facilitate hanging of leg holsters, ammo pouches and gas mask bags. Stiff scuba webbing belt attached to inside structural webbing by velcoe for easy adjustment and positioning of holsters and pouches. Waist belt adjuster buckle is located on the left side so that it will not interfere with positioning of the right side weapon (harness is available in a model for left handed users). Leg loop portion of harness can be quickly attached to the belt with a standard locking carabiner (not included). This converts the duty belt portion of the system into a fully
functional rappel harness. Weight 1 lb. 12 oz.
• Sizes M, L, XL
• Quick leg adjustment with camlock buckles
• Fully structural rear attachment loop
• All hardware plated or epoxy coated black

Well suited for rescue, military, SWAT and tactical rappel applications where a metal attachment point is not necessary. Originally designed for the US Navy Seals tactical teams, the anatomical configuration
of the harness has made it the choice for many tactical teams who need a non-restrictive harness system. Front attachment point is provided through slot webbing construction. Weight 1 lb. 3 oz.
• One size, fully adjustable
• Available in terra, black and foliage green
• Quick leg adjustment with camlock buckles
• All hardware plated or epoxy coated in color
• One gear rack
• Meets ANSI/OSHA Class II harness standards

• Available in colors: Black, Terra, Foliage Green