Hauling and raising pulley with built in cam safety grab. The 4:1 unit provides the ideal mechanical advantage for manhole and
vessel extraction. Once the Haul Safe is attached to rigging point and worker is p roperly secured with safety cam engaged, unit works as a hauling system with a deadman’s safety. Even if the hauling team is
incapacitated, the victim is secure and will not fall. Device works with the cam before the sheave to allow much greater direction of pull on haul line. The cam can be locked open with the safety pin to use the Haul Safe as a double sheave pulley. Exceeds all applicable NFPA, OSHA, ANSI and CSA standards. Designed for 7/16 inch rope and
will accept 1/2 inch NFPA ropes. Strength 10,000 lbf/44kN.

Completely rigged and ready to go! Kit includes:
• 200 feet of BlueWater NFPA low stretch rope with swaged end
• RSI double sheave Haul Safe
• NEW Upgraded to include YATES Mountain Lite 2 inch double sheave pulley with becket
• Mallion oval screw link
• Steel arborist 3 stage carabiner
• Steel modified 3 stage carabiner
• Yates rope bag

The most efficient Haul Safe System available! Completely rigged and ready to go!

Delux kit includes:
• 200 feet of BlueWater 7/16" LEP (Low Elongation Polyester) rope minimizes stretch in the system by up to 50% over standard 1/2" NFPA Nylon core rope. Static elongation is a very low 2.0% at 600 lb. load. Very efficient NFPA Certified with swaged end. Strength 7,000 lbf./31 kN

• RSI double sheave Haul Safe
• YATES Mountain Lite 2 inch double sheave bearing pulley with becket
• Mallion oval screw link
• Steel OVALOCK 3 stage carabiners
• Yates rope bag

Keep ropes from becoming twisted or wrapped. Oval hole to
accommodate 2 carabiners. Sealed bearing.

Strength 9000
lbf/36kN. NFPA G.

Keep ropes from becoming twisted or wrapped. Large size attahment holes. Sealed bearing.

Strength 9000 lbf/
40kN. NFPA G and CE.