Petzl ASAP® Asap®
Mobile fall arrester for rope. For use on a safety rope.

* Stops a fall, slide or uncontrolled descent.
* Locks even if the device is grabbed during a fall.
* Works on vertical or angled rope.
* Moves along the rope without manual intervention (downwards and upwards).
* Easy to install and remove at any point on the rope.

Meets OSHA requirements in North America. Certified to CE EN 353 2

Technical specifications: For 10.5 to 13 mm semi-static ropes (EN 1891 type A) certified with the device.
Comes with the OK TRIACT automatic locking carabiner.
350 g + carabiner (77 g) = 427 g. SOLD with 20 cm or 40 cm ASAP'SORBER Lanyard. Specify desired length when ordering.

MUST BE USED IN CONJUNCTION WITH 20cm or 40cm PETZL ASAP'SORBER LANYARD.

Link to product information on Petzl ASAP: ASAP Product Information

ITEM# 7015 $209.00

Petzl Stop Versatile, self braking descent device that stops when the handle is released. Speed of descent is controlled by varying the grip on the free end of the rope. Can be installed on the rope without disconnecting it from the harness. Climbing is also possible with the addition of a rope grab and a foot stirrup or etrier. Can also be used effectively in haul systems. Great for rope access work.

ITEM# 7009 $90.00

Petzl I’D Self braking device designed for descending rope and for belaying. Easily installed on the rope without disconnecting it from the harness. Anti-panic feature built in. When the user pulls too hard on the handle it causes the device to lock up. Easily releaseable after locking. Climbing is also possible
with the addition of a rope grab and a foot stirrup or etrier. Can also be used effectively in haul systems. Great for rope access work. NFPA G.

ITEM# 7020 $196.00

SMC 4 Bar U-Racks This compact rack is fitted with 4 long-wear tubular
stainless bars, two of which are tie-off bars. This
rack design allows the user to vary the friction without
adding or dropping bars or disconnecting from
the system like traditional racks, whether it is being
used in a controlled, fast single person rappel or a
heavy rescue lower. As more professional trainers
begin to expose their clients to the benefits of this
alternative style rack, it is clear they are growing in
acceptance and popularity.
ITEM# Rack Type Type of Bars  
1404 Straight Stainless Steel $100.00

SMC Brake Racks One of the most widely used descent and lowering devices available. It will accept single or double ropes of several diameters and yet provides a wide
range of friction for descent control or lowering control. Allows the user to change the number of bars as necessary when in use with a load. Certified to NFPA 1983/2001 edition.
• 1 inch diameter stainless steel tie off bar
• 7/8 inch diameter blue anodized aluminum bar with training groove and straight slot
ITEM# Rack Type Type of Bars  
1401 Straight Aluminum Bars $105.00
1402 Twisted Aluminum Bars $105.00

ISC Rescue Ascenders Durable heavyweight construction specifically
designed for rigging and rescue applications. These
are no lightweight rock climbing ascenders! Easy to
operate with gloved hand, these ascenders come
with large thumb release on cam, large molded
hand grip and double clip-in points. Unique cam
design allows for increased strength. Will accommodate
9 to 13 mm ropes. Strength (frame) 6000 lbf.
 
ITEM# 1011 $174.00 pr.
 

Petzl Rescucender Compact rope clamp/grab intended for moving on fixed ropes. Suitable for hauling heavy loads. Incorporated into a hauling system, it operates as a
progress capture device. Acts as a load limiter if overloaded or subjected to an impact force.
Available in all black.

ITEM# 7050 $65.00

Petzl Croll Attaches to front of harness in chest area to help user maintain an upright position and serve as a progress capture. Yates Rope Access harness and
RTR Tower Harness have attachment points already equipped to utilize the Croll’s excellent features.

ITEM# 7016 $49.00

[Rope Rescue] [Rope] [Fire Rescue] [Hardware] [Confined Space] [Anchors] [Industrial] [Lanyards] [Tactical] [Price List]


YATES Gear Inc. 2608 Hartnell Ave. Suite 6, Redding, CA 96002
Phone: 530.222.4606     Fax: 800.YATES.16
info@yatesgear.com